射出成形機の騒音はどこから来るのでしょうか？

の 射出成形機 私たちの生活におけるプラスチックの利便性を支える重要なプラスチック金型を製造する機械です。射出成形機を使用していると、異音が発生することがあります。これらのノイズはどこから来るのでしょうか?

Generally, when the injection molding machine is used normally, there will be some noises. のse noises can be used to judge that the operation of the machine is very normal, because some noises appear under normal conditions, and some noises are caused by faults. When the injection molding oil pump produces abnormal noise and vibration, it is usually possible from many aspects, for example, the installation of the oil pump motor is not concentric, the coupling of the oil pump is loose, the oil level is too low, etc., which will cause the oil pump to appear. cause of noise. At this time, the cause should be identified through inspection, and then a reasonable response can be taken to solve the problem. If the injection molding machine encounters a lot of noise from the motor during operation, it may be caused by damage to the motor bearing, so it is necessary to replace the connecting bearing. の noise of the injection molding machine may also have other sources, such as the total pressure valve, pipeline, hydraulic cylinder may be the source of the noise.

射出成形機から異音が発生した場合は、目的のメンテナンスを行う前に異音の発生源を確認する必要があります。